• In Stock - (Usually dispatched within 1-2 working days mon-fri)
The Beiter REST for Recurve is the first Arrow Rest designed by Werner Beiter which will be sold on the archery market. Years of testing, many prototypes, hundreds of High Speed Films have helped to develop this first Beiter arrow rest for Recurve Bows.
Some very important notes to start with:
the Beiter REST for Recurve is designed to be used for both left- and right-handed archers !
the Beiter REST for Recurve may be changed within seconds, for example from Carbon- to Aluminum-Shafts !
the Beiter REST for Recurve makes no noise (according to our test archers!) !
Sales Unit:
Beiter Rest, (Support with Glue Strip assembled with 1 Spindle, 1 Finger)
1 Extra Finger
1 Extra Spindle
1 Beiter Rest Tool
1 Extra Glue Strip
Instructions and Installation Guide
boxed in a 30mm x120mm Twist-Box
The Support has incorporated a revolutionary Guiding System for the Finger, which may change position, carried by a specific designed Spindle.
Due to the Support being applied with a specific angle (max ca. 15°), the Arrow Position versus the Plunger and the Nocking Point may be determined and changed very quickly and more precise than with any other Rest on the market!
A Scale offers the opportunity to re-position the Finger after tests or changes.
At the moment two different Finger are available :
15-12-0,65 for shafts with small diameter, Ø 5,2mm +/-1mm (10/64"-14/64")
17-23-0,77 for shafts with large diameter Ø 9,3mm +/-1mm (ca. 20/64"-24/64")
Two Finger (of the same make) are included in each Box, but extra Fingers are available as spare part.
3 Supports are available, differing in their thickness, to have the desired arrow position on bows with different cut-outs: #S1, #S2 (= #S1 + 1mm), #S3 (= S#1 + 2mm). Following a little guide to choose the correct Rest version:
Version Finger S# "A" Ø (mm) shaft size
RE1512065 15-12 1 15mm 5,2 +/-1 10/64"-14/64"
RE1612065 15-12 2 16mm 5,2 +/-1 10/64"-14/64"
RE1712065 15-12 3 17mm 5,2 +/-1 10/64"-14/64"
RE1723077 17-23
1 17mm 9,3 +/-1 20/64"-24/64"
RE1923077 17-23 2 18mm 9,3 +/-1 20/64"-24/64"
RE1923077 17-23 3 19mm 9,3 +/-1 20/64"-24/64"
On the Finger you will find some details to determine the used model:
The number "15 (S #1)" respectively "17 (S #1)" tells, that this finger may be used up to arrow to handle distance 15mm respectively 17mm (Dist. "A").
The circled number tells, which arrow diameter will best fit for the use: 12 from 10/64" to 14/64", 23 from 20/64" to 24/64".
The number at the bottom of the finger (e.g. 0,65), informs about the thickness of the finger.
For the use of the Beiter Rest we suggest:
Beiter Plunger: : it has the same diameter (Ø 6,0mm) as the centering hole of the Beiter Rest. This allows an extremely precise positioning of the Beiter rest on the bow.
Nockposition: Turn the nock so that the vanes are in a "Y-Position" to the string. (Pictures are shortly available on our Website!) In this position you may reach the best possible clearance and the arrow may pass the bow-window without interference!
